Cooler Master Cosmos Alpha Review: A Mega-Case With Beauty, Brawn, and a Few Bruises

Cooler Master Cosmos Alpha Review: A Mega-Case With Beauty, Brawn, and a Few Bruises

The first thing you’ll see that sets apart the Cosmos Alpha from most big towers? Definitely the exterior rails, which resemble the gear-mounting racks on the roofs of some SUVs.

While the rails of the original Cosmos were designed primarily for appearance and/or panel protection, that’s no longer the case (cough) with its latest edition. With over an inch of space into which you can insert your mitts, the Alpha’s cast-aluminum rails add some height versus its early ancestor. The case is also about half an inch deeper and 2.5 inches wider than the original.

The Cosmos Alpha keeps the four Type-A ports of its progenitor but replaces its elder’s now-classic FireWire and eSATA ports with dual USB 3.2 Gen 2×2 Type-C. The original version’s USB 2.0 connections are upgraded to USB 3.2 Gen 1; the headphone and microphone jacks merged into a single four-pole headset jack; the power and reset buttons are moved to the outer rim; and an ARGB lighting mode button is added opposite the power button.

The top panel I/O on the Cooler Master Cosmos Alpha

(Credit: Thomas Soderstrom)

The bottom panel’s dust filter slides out from the front, whereas the front panel’s dust filter is accessible by pulling the black grid section out of its silver frame.

The bottom filter of the Cooler Master Cosmos Alpha

(Credit: Thomas Soderstrom)

As the Cosmos Alpha has a large bottom radiator mount, the lower filter covers a similarly large area. Also notice that rubber strips are attached to the bottom edge of the lower rails to reduce scratching, sliding, and the transmission of vibration.

The Cooler Master Cosmos Alpha on its side

(Credit: Thomas Soderstrom)

The back of the Cosmos Alpha looks much like the front, so much so that the front panel’s grid fits there too, leaving only the rear panel’s lack of magnetic latches in the corresponding locations to prevent builders from swapping these. (Not that you would: The gaps above and below the smaller cover serve as cable passages.)

Also, notice that a giant perforated steel vent fills most of the right side’s panel.

The Cooler Master Cosmos Alpha with side panels removed

(Credit: Thomas Soderstrom)

Speaking of perforated steel, the top panel pulls off to reveal a pair of adjustable fan rails, set wide enough to attach 200mm fans, with a hole long enough to fit two of those. The adjustability also helps if you want to install a 360mm-format radiator to align it however you like over the motherboard.

The top fan mounts of the Cooler Master Cosmos Alpha

(Credit: Thomas Soderstrom)

Unlike the top panel, the front vent is all plastic: A flexible filter sheet snaps into place behind the rigid plastic façade.

The top panel filters of the Cooler Master Cosmos Alpha

(Credit: Thomas Soderstrom)

Lifting the glass panel from its hinges allows extra space for installation and removal of interior components, while popping out the front panel’s center section merely allows visual inspection of the Cosmos Alpha’s twin 200mm-by-38mm intake fans. Two identical power supply shrouds fill the gaps above and below the motherboard.

The rear of the Cooler Master Cosmos Alpha

(Credit: Thomas Soderstrom)

I removed the power supply shrouds first to see how much space the case had (see the left image below), then removed the graphics card brace from the opening before going after the two cover panels on the inside (right-hand image). The hinges of both side panels are visible facing the back of the case.

The Cooler Master Cosmos Alpha with side panels removed

(Credit: Thomas Soderstrom)

The Cosmos Alpha’s single rear fan fills one of the three fan mounts behind the motherboard and graphics card, limiting access to their rear ports. To the side, two crossbars that sit behind the motherboard tray can be fitted with additional cross braces to hold up to three 360mm radiators, but the only way to get room for all that hardware would be to move the motherboard tray out of the way, which we’ll get to momentarily.

The Cooler Master Cosmos Alpha with side panels removed

(Credit: Thomas Soderstrom)

A third cable cover that sits behind the motherboard tray can be removed via two screws at the bottom to provide easy access to those cables. A removable triple-drive 3.5-inch/2.5-inch tray sits ahead of it, with an ARGB/PWM fan hub mounted to its center. For these two photos, I pointed the right side panel’s hinge perpendicular to its closed position.



Newsletter Icon

Get Our Best Stories!

All the Latest Tech, Tested by Our Experts


Lab Report Newsletter Image

Sign up for the Lab Report to receive PCMag’s latest product reviews, buying advice, and insights.

By clicking Sign Me Up, you confirm you are 16+ and agree to our Terms of Use and Privacy
Policy.

Thanks for signing up!

Your subscription has been confirmed. Keep an eye on your inbox!

The Cooler Master Cosmos Alpha with side panels removed

(Credit: Thomas Soderstrom)

The Cosmos Alpha’s two factory-connected fans have no lighting; the two ARGB leads that appear in this photo are connected to the case’s integrated light bars. I found that connecting the ARGB/PWM fan hub’s input cables to the test motherboard we use caused its front-panel mode button to be disabled, whereas pulling the ARGB lead from that motherboard allowed us to cycle the hub’s integrated controller through its 13 modes. Holding its button for a couple of seconds also turned the lighting off, but again only when the hub was operating from its own controller.

The Cooler Master Cosmos Alpha fan hub

(Credit: Thomas Soderstrom)

Held in place by four sets of folding wing nuts and pinch brackets, the motherboard tray’s sliding adjuster allows users to expand the space behind the motherboard from 10mm to 80mm, though my test GeForce RTX 4070 Ti wouldn’t fit behind the glass panel when the motherboard was pushed to the extreme: The test hardware realistically allowed a bit over 60mm of maximum behind-motherboard space without buying the PCI Express riser cable needed to enable vertical card orientation in this case. (It’s not included.)

The curious will also notice one of the right side panel’s three hanger holes on the right hinge, as well as two of the four screws that hold the left hinge to the back of the case (left). My next image will bring this all together!

The interior hinge of the Cooler Master Cosmos Alpha

(Credit: Thomas Soderstrom)

Bounded at the top and bottom by a pair of full ATX-size power supply brackets, the eight-slot expansion panel and I/O shield join the motherboard tray as a sliding assembly that creates more or less space behind the motherboard tray for mounting additional cooling hardware.

The Cooler Master Cosmos Alpha on its side

(Credit: Thomas Soderstrom)

Autor

  • Sou criador do MdroidTech, especialista em tecnologia, aplicativos, jogos e tendências do mundo digital. Com anos de experiência testando dispositivos e softwares, compartilha análises, tutoriais e notícias para ajudar usuários a aproveitarem ao máximo seus aparelhos. Apaixonado por inovação, mantém o compromisso de entregar conteúdo original, confiável e fácil de entender